Baghouse Dust Collector

Baghouse Dust Collector

Home > ACCESSORY SPARE PARTS > asphalt parts > Baghouse Dust Collector


filter-bag-1The bags are made of NOMEX and can bear 220℃. The flexible clamps at the bag mouth perfectly match with bag supporters which is good for installation. The top cover is easy to open for inspection or replacing bags. Pulse type cleaning devices are installed on the collector, and auto-control panel with auto-pulse timer are installed in the control box. The solenoid valve is to control the cylinder and top door. The exhaust fan provides negative pressure and suction air to clean the bags orderly, and cleaning area is above 94%.

The dusts fall down and gather in the dust collector box and then will be discharged by the screw conveyor. To make sure the bag works safely and reliably, temperature control system and transfinite ceasefire device are mounted to ensure the smoke temperature is within the rated range (normally 220℃, short-time temperature resistant limit is 240℃). If it is higher, the control system will cut the fuel supply automatically. The temperature measuring system between exhaust fan and dust collector can show the burning condition as well and remind the operator when the temperature is blow 80℃.

Technical parameters

1. Air emission: ≤20mg/Nm³;
2. Air black: Ringelmann I;
3. Working noise: ≤80dB;
4. Operation room noise: ≤70dB.

Model BD200B BD380B BD460B BD640B BD900B
Cleaning type Pluse type
Amount of dust bag 206pcs 384pcs 448pcs 624pcs 896pcs
Area of filter surface 200m2 400m2 480m2 660m2 912m2
Air-to-cloth ratio 90.7 Em³/㎡h 90.7 Em³/㎡h 90.7 Em³/㎡h 90.7 Em³/㎡h 90.7 Em³/㎡h
Air pressure 0.4-0.7Mpa
Aggregates spiral power 2.2 kW 3 kW 3 kW 4 kW 5.5kW
Exhaust Fan Power 18.5kW 45kW 75kW 110kW 150kW
Chimney height 8.1 m
Matched asphalt plant 25-50t/h 60-110t/h 115-140t/h 150-210t/h 220-260t/h

Detailed pictures